Feds take aim at potent VPNFilter malware allegedly unleashed by Russia.
Later in the day, The Daily Beast reported that VPNFilter was indeed developed by a Russian hacking group, one known by a variety of names, including Sofacy, Fancy Bear, APT 28, and Pawn Storm. The Daily Beast also said the FBI had seized an Internet domain VPNFilter used as a backup means to deliver later stages of the malware to devices that were already infected with the initial stage 1. The seizure meant that the primary and secondary means to deliver stages 2 and 3 had been dismantled, leaving only a third fallback, which relied on attackers sending special packets to each infected device.
The redundant mechanisms for delivering the later stages address a fundamental shortcoming in VPNFilter—stages 2 and 3 can’t survive a reboot, meaning they are wiped clean as soon as a device is restarted. Instead, only stage 1 remains. Presumably, once an infected device reboots, stage 1 will cause it to reach out to the recently seized ToKnowAll.com address. The FBI’s advice to reboot small office and home office routers and NAS devices capitalizes on this limitation. In a statement published Friday, FBI officials suggested that users of all consumer-grade routers, not just those known to be vulnerable to VPNFilter, protect themselves. The officials wrote:
The FBI recommends any owner of small office and home office routers reboot the devices to temporarily disrupt the malware and aid the potential identification of infected devices. Owners are advised to consider disabling remote management settings on devices and secure with strong passwords and encryption when enabled. Network devices should be upgraded to the latest available versions of firmware.
In a statement also published Friday, Justice Department officials wrote:
Owners of SOHO and NAS devices that may be infected should reboot their devices as soon as possible, temporarily eliminating the second stage malware and causing the first stage malware on their device to call out for instructions. Although devices will remain vulnerable to reinfection with the second stage malware while connected to the Internet, these efforts maximize opportunities to identify and remediate the infection worldwide in the time available before Sofacy actors learn of the vulnerability in their command-and-control infrastructure.
The US Department of Homeland Security has also issued a statement advising that “all SOHO router owners power cycle (reboot) their devices to temporarily disrupt the malware.”
As noted in the statements, rebooting serves the objectives of (1) temporarily preventing infected devices from running the stages that collect data and other advanced attacks and (2) helping FBI officials to track who was infected. Friday’s statement said the FBI is working with the non-profit Shadow Foundation to disseminate the IP addresses of infected devices to ISPs and foreign authorities to notify end users.
Authorities and researchers still don’t know for certain how compromised devices are initially infected. They suspect the attackers exploited known vulnerabilities and default passwords that end users had yet to patch or change. That uncertainty is likely driving the advice in the FBI statement that all router and NAS users reboot, rather than only users of the 14 models known to be affected by VPNFilter, which are:
- Linksys E1200
- Linksys E2500
- Linksys WRVS4400N
- Mikrotik RouterOS for Cloud Core Routers: Versions 1016, 1036, and 1072
- Netgear DGN2200
- Netgear R6400
- Netgear R7000
- Netgear R8000
- Netgear WNR1000
- Netgear WNR2000
- QNAP TS251
- QNAP TS439 Pro
- Other QNAP NAS devices running QTS software
- TP-Link R600VPN
The advice to reboot, update, change default passwords, and disable remote administration is sound and in most cases requires no more than 15 minutes. Of course, a more effective measure is to follow the advice Cisco gave Wednesday to users of affected devices and perform a factory reset, which will permanently remove all of the malware, including stage 1. This generally involves using a paper clip or thumb tack to hold down a button on the back of the device for 5 seconds. The reset will remove any configuration settings stored on the device, so users will have to restore those settings once the device initially reboots. (It’s never a bad idea to disable UPnP when practical, but that protection appears to have no effect on VPNFilter.)
There’s no easy way to know if a router has been infected by VPNFilter. For more advanced users, Cisco provided detailed indicators of compromise in Wednesday’s report, along with firewall rules that can be used to protect devices. Ars has much more about VPNFilter here.